All Pine Crafter bunk beds and loft beds have been tested by an independent laboratory to confirm our beds conform to the following federal safety standards.

• ASTM F  1427-13 "Standard Consumer Safety Specifications for Bunk Beds"
• Code of Federal Regulations (CFR) 1213 "Safety Standards for Entrapment Hazards in Bunk Beds".
• Code of Federal Regulations (CFR) 1513 "Requirements for Bunk Beds".

All appropriate testing has been performed and all certification papers are on file at our manufacturing facility.
Please remember that children under the age of 6 are NOT to be on any upper bunks of any bunk bed or loft bed.

Recommended weight capacity per sleeping surface is 250 pounds.

Click Here to view Certificate of General Conformity.

To help prevent serious or fatal injuries from entrapment or falls:
*Read & follow the information on the WARNING shown on the end structure of the upper bunk or on the carton.
*DO NOT remove the warning label from the bed.
*Keep these instructions for future reference.
*Use only a mattress meeting the following specifications on all upper and lower bunks.
  Bed Type          Width              Length     l       Bed Type      Width               Length
  Standard Twin    37½”-38½”        74”-75”      l       XL Twin          37½”-38½”         79”-80”
  Standard Full     52½”-53½”        74”-75”      l       XL Full           52½”-53½”         79”-80”
*Total thickness of both mattress and foundation combined MUST NOT EXCEED 6” for all top and bottom bunks.
*Surface of mattress must be at least 5 inches (127mm) below the upper edge of guardrails.
*The MAXIMUM weight capacity for the upper bunk is not to exceed 250 lbs.
*DO NOT allow children under 6 years of age to use upper bunk.
*Periodically check and ensure that the guardrails, ladder, handle and other components are in their proper position, free from damage and that all connectors are tightened and secure.
*DO NOT allow horseplay, rough playing or jumping on the beds and do not allow playing or hiding under the beds.
*Always use the ladder for entering or leaving the upper bunk.
*DO NOT use substitute parts. Contact the manufacturer or dealer for replacement parts.
*Use of a nightlight may provide added safety precaution for a person using the upper bunk.
*Always use the guardrails on both sides of the upper bunk.
*If the bunk bed will be placed next to a wall, the guardrails that run the full length of the bed should be placed against the wall to prevent entrapment between the bed and the wall.
*The use of water or sleep flotation mattresses is prohibited.
*No more than one person is allowed on the upper bunk at a time.
STRANGULATION HAZARD: Never attach or hang objects to any part of the bed that are not designed for use with the bed.Objects such as hangers, hooks, belts, bags, ropes, string, etc. should not be used on or around the bunk bed.To help prevent serious or fatal injuries from entrapment or falls:

REPLACEMENT PARTS
Replacement hardware and parts may be obtained from any of our Pine Crafter dealers.